Exporters

You are viewing the English version of this page because it has not yet been fully translated. Interested in helping out? See Contributing.

OpenTelemetryコレクターにテレメトリーを送信し、正しくエクスポートされることを確認してください。本番環境でコレクターを使用することはベストプラクティスです。テレメトリーを可視化するために、Jaeger、Zipkin、 Prometheus、またはベンダー固有のようなバックエンドにエクスポートしてください。

使用可能なエクスポーター

レジストリには、C++ 用のエクスポーターのリストが含まれています。

エクスポーターの中でも、OpenTelemetry Protocol (OTLP)エクスポーターは、OpenTelemetryのデータモデルを考慮して設計されており、OTelデータを情報の損失なく出力します。さらに、多くのテレメトリデータを扱うツールがOTLPに対応しており（たとえば、Prometheus、Jaegerやほとんどのベンダー）、必要なときに高い柔軟性を提供します。 OTLPについて詳細に学習したい場合は、OTLP仕様を参照してください。

このページでは、主要なOpenTelemetry C++ エクスポーターとその設定方法について説明します。

OTLP

コレクターのセットアップ

注意

OTLPコレクターまたはバックエンドがすでにセットアップされている場合は、このセクションをスキップして、アプリケーション用のOTLPエクスポーター依存関係のセットアップに進むことができます。

OTLPエクスポーターを試し、検証するために、テレメトリーを直接コンソールに書き込むDockerコンテナでコレクターを実行できます。空のディレクトリで、以下の内容でcollector-config.yamlというファイルを作成します。

receivers:
  otlp:
    protocols:
      grpc:
        endpoint: 0.0.0.0:4317
      http:
        endpoint: 0.0.0.0:4318
exporters:
  debug:
    verbosity: detailed
service:
  pipelines:
    traces:
      receivers: [otlp]
      exporters: [debug]
    metrics:
      receivers: [otlp]
      exporters: [debug]
    logs:
      receivers: [otlp]
      exporters: [debug]

次に、Docker コンテナでコレクターを実行します。

docker run -p 4317:4317 -p 4318:4318 --rm -v $(pwd)/collector-config.yaml:/etc/otelcol/config.yaml otel/opentelemetry-collector

このコレクターは、OTLPを介してテレメトリーを受け取ることができるようになりました。後で、テレメトリーを監視バックエンドに送信するためにコレクターを設定することもできます。

Dependencies

If you want to send telemetry data to an OTLP endpoint (like the OpenTelemetry Collector, Jaeger or Prometheus), you can choose between two different protocols to transport your data:

HTTP/protobuf
gRPC

Make sure that you have set the right cmake build variables while building OpenTelemetry C++ from source:

-DWITH_OTLP_GRPC=ON: To enable building OTLP gRPC exporter.
-DWITH_OTLP_HTTP=ON: To enable building OTLP HTTP exporter.

Usage

Next, configure the exporter to point at an OTLP endpoint in your code.

#include "opentelemetry/exporters/otlp/otlp_http_exporter_factory.h"
#include "opentelemetry/exporters/otlp/otlp_http_exporter_options.h"
#include "opentelemetry/sdk/trace/processor.h"
#include "opentelemetry/sdk/trace/batch_span_processor_factory.h"
#include "opentelemetry/sdk/trace/batch_span_processor_options.h"
#include "opentelemetry/sdk/trace/tracer_provider_factory.h"
#include "opentelemetry/trace/provider.h"
#include "opentelemetry/sdk/trace/tracer_provider.h"

#include "opentelemetry/exporters/otlp/otlp_http_metric_exporter_factory.h"
#include "opentelemetry/exporters/otlp/otlp_http_metric_exporter_options.h"
#include "opentelemetry/metrics/provider.h"
#include "opentelemetry/sdk/metrics/aggregation/default_aggregation.h"
#include "opentelemetry/sdk/metrics/export/periodic_exporting_metric_reader.h"
#include "opentelemetry/sdk/metrics/export/periodic_exporting_metric_reader_factory.h"
#include "opentelemetry/sdk/metrics/meter_context_factory.h"
#include "opentelemetry/sdk/metrics/meter_provider.h"
#include "opentelemetry/sdk/metrics/meter_provider_factory.h"

#include "opentelemetry/exporters/otlp/otlp_http_log_record_exporter_factory.h"
#include "opentelemetry/exporters/otlp/otlp_http_log_record_exporter_options.h"
#include "opentelemetry/logs/provider.h"
#include "opentelemetry/sdk/logs/logger_provider_factory.h"
#include "opentelemetry/sdk/logs/processor.h"
#include "opentelemetry/sdk/logs/simple_log_record_processor_factory.h"

namespace trace_api = opentelemetry::trace;
namespace trace_sdk = opentelemetry::sdk::trace;

namespace metric_sdk = opentelemetry::sdk::metrics;
namespace metrics_api = opentelemetry::metrics;

namespace otlp = opentelemetry::exporter::otlp;

namespace logs_api = opentelemetry::logs;
namespace logs_sdk = opentelemetry::sdk::logs;


void InitTracer()
{
  trace_sdk::BatchSpanProcessorOptions bspOpts{};
  otlp::OtlpHttpExporterOptions opts;
  opts.url = "http://localhost:4318/v1/traces";
  auto exporter  = otlp::OtlpHttpExporterFactory::Create(opts);
  auto processor = trace_sdk::BatchSpanProcessorFactory::Create(std::move(exporter), bspOpts);
  std::shared_ptr<trace_api::TracerProvider> provider = trace_sdk::TracerProviderFactory::Create(std::move(processor));
  trace_api::Provider::SetTracerProvider(provider);
}

void InitMetrics()
{
  otlp::OtlpHttpMetricExporterOptions opts;
  opts.url = "http://localhost:4318/v1/metrics";
  auto exporter = otlp::OtlpHttpMetricExporterFactory::Create(opts);
  metric_sdk::PeriodicExportingMetricReaderOptions reader_options;
  reader_options.export_interval_millis = std::chrono::milliseconds(1000);
  reader_options.export_timeout_millis  = std::chrono::milliseconds(500);
  auto reader = metric_sdk::PeriodicExportingMetricReaderFactory::Create(std::move(exporter), reader_options);
  auto context = metric_sdk::MeterContextFactory::Create();
  context->AddMetricReader(std::move(reader));
  auto u_provider = metric_sdk::MeterProviderFactory::Create(std::move(context));
  std::shared_ptr<metrics_api::MeterProvider> provider(std::move(u_provider));
  metrics_api::Provider::SetMeterProvider(provider);
}

void InitLogger()
{
  otlp::OtlpHttpLogRecordExporterOptions opts;
  opts.url = "http://localhost:4318/v1/logs";
  auto exporter  = otlp::OtlpHttpLogRecordExporterFactory::Create(opts);
  auto processor = logs_sdk::SimpleLogRecordProcessorFactory::Create(std::move(exporter));
  std::shared_ptr<logs_api::LoggerProvider> provider =
      logs_sdk::LoggerProviderFactory::Create(std::move(processor));
  logs_api::Provider::SetLoggerProvider(provider);
}

#include "opentelemetry/exporters/otlp/otlp_grpc_exporter_factory.h"
#include "opentelemetry/exporters/otlp/otlp_grpc_exporter_options.h"
#include "opentelemetry/sdk/trace/processor.h"
#include "opentelemetry/sdk/trace/batch_span_processor_factory.h"
#include "opentelemetry/sdk/trace/batch_span_processor_options.h"
#include "opentelemetry/sdk/trace/tracer_provider_factory.h"
#include "opentelemetry/trace/provider.h"
#include "opentelemetry/sdk/trace/tracer_provider.h"

#include "opentelemetry/exporters/otlp/otlp_grpc_metric_exporter_factory.h"
#include "opentelemetry/exporters/otlp/otlp_grpc_metric_exporter_options.h"
#include "opentelemetry/metrics/provider.h"
#include "opentelemetry/sdk/metrics/aggregation/default_aggregation.h"
#include "opentelemetry/sdk/metrics/export/periodic_exporting_metric_reader.h"
#include "opentelemetry/sdk/metrics/export/periodic_exporting_metric_reader_factory.h"
#include "opentelemetry/sdk/metrics/meter_context_factory.h"
#include "opentelemetry/sdk/metrics/meter_provider.h"
#include "opentelemetry/sdk/metrics/meter_provider_factory.h"

#include "opentelemetry/exporters/otlp/otlp_grpc_log_record_exporter_factory.h"
#include "opentelemetry/exporters/otlp/otlp_grpc_log_record_exporter_options.h"
#include "opentelemetry/logs/provider.h"
#include "opentelemetry/sdk/logs/logger_provider_factory.h"
#include "opentelemetry/sdk/logs/processor.h"
#include "opentelemetry/sdk/logs/simple_log_record_processor_factory.h"

namespace trace_api = opentelemetry::trace;
namespace trace_sdk = opentelemetry::sdk::trace;

namespace metric_sdk = opentelemetry::sdk::metrics;
namespace metrics_api = opentelemetry::metrics;

namespace otlp = opentelemetry::exporter::otlp;

namespace logs_api = opentelemetry::logs;
namespace logs_sdk = opentelemetry::sdk::logs;

void InitTracer()
{
  trace_sdk::BatchSpanProcessorOptions bspOpts{};
  opentelemetry::exporter::otlp::OtlpGrpcExporterOptions opts;
  opts.endpoint = "localhost:4317";
  opts.use_ssl_credentials = true;
  opts.ssl_credentials_cacert_as_string = "ssl-certificate";
  auto exporter  = otlp::OtlpGrpcExporterFactory::Create(opts);
  auto processor = trace_sdk::BatchSpanProcessorFactory::Create(std::move(exporter), bspOpts);
  std::shared_ptr<opentelemetry::trace_api::TracerProvider> provider =
      trace_sdk::TracerProviderFactory::Create(std::move(processor));
  // Set the global trace provider
  trace_api::Provider::SetTracerProvider(provider);
}

void InitMetrics()
{
  otlp::OtlpGrpcMetricExporterOptions opts;
  opts.endpoint = "localhost:4317";
  opts.use_ssl_credentials = true;
  opts.ssl_credentials_cacert_as_string = "ssl-certificate";
  auto exporter = otlp::OtlpGrpcMetricExporterFactory::Create(opts);
  metric_sdk::PeriodicExportingMetricReaderOptions reader_options;
  reader_options.export_interval_millis = std::chrono::milliseconds(1000);
  reader_options.export_timeout_millis  = std::chrono::milliseconds(500);
  auto reader = metric_sdk::PeriodicExportingMetricReaderFactory::Create(std::move(exporter), reader_options);
  auto context = metric_sdk::MeterContextFactory::Create();
  context->AddMetricReader(std::move(reader));
  auto u_provider = metric_sdk::MeterProviderFactory::Create(std::move(context));
  std::shared_ptr<opentelemetry::metrics::MeterProvider> provider(std::move(u_provider));
  metrics_api::Provider::SetMeterProvider(provider);
}

void InitLogger()
{
  otlp::OtlpGrpcLogRecordExporterOptions opts;
  opts.endpoint = "localhost:4317";
  opts.use_ssl_credentials = true;
  opts.ssl_credentials_cacert_as_string = "ssl-certificate";
  auto exporter  = otlp::OtlpGrpcLogRecordExporterFactory::Create(opts);
  auto processor = logs_sdk::SimpleLogRecordProcessorFactory::Create(std::move(exporter));
  nostd::shared_ptr<logs_api::LoggerProvider> provider(
      logs_sdk::LoggerProviderFactory::Create(std::move(processor)));
  logs_api::Provider::SetLoggerProvider(provider);
}

Console

To debug your instrumentation or see the values locally in development, you can use exporters writing telemetry data to the console (stdout).

While building OpenTelemetry C++ from source the OStreamSpanExporter is included in the build by default.

#include "opentelemetry/exporters/ostream/span_exporter_factory.h"
#include "opentelemetry/sdk/trace/exporter.h"
#include "opentelemetry/sdk/trace/processor.h"
#include "opentelemetry/sdk/trace/simple_processor_factory.h"
#include "opentelemetry/sdk/trace/tracer_provider_factory.h"
#include "opentelemetry/trace/provider.h"

#include "opentelemetry/exporters/ostream/metrics_exporter_factory.h"
#include "opentelemetry/sdk/metrics/meter_provider.h"
#include "opentelemetry/sdk/metrics/meter_provider_factory.h"
#include "opentelemetry/metrics/provider.h"

#include "opentelemetry/exporters/ostream/log_record_exporter_factory.h"
#include "opentelemetry/logs/provider.h"
#include "opentelemetry/sdk/logs/logger_provider_factory.h"
#include "opentelemetry/sdk/logs/processor.h"
#include "opentelemetry/sdk/logs/simple_log_record_processor_factory.h"

namespace trace_api      = opentelemetry::trace;
namespace trace_sdk      = opentelemetry::sdk::trace;
namespace trace_exporter = opentelemetry::exporter::trace;

namespace metrics_sdk      = opentelemetry::sdk::metrics;
namespace metrics_api      = opentelemetry::metrics;
namespace metrics_exporter = opentelemetry::exporter::metrics;

namespace logs_api = opentelemetry::logs;
namespace logs_sdk = opentelemetry::sdk::logs;
namespace logs_exporter = opentelemetry::exporter::logs;

void InitTracer()
{
  auto exporter  = trace_exporter::OStreamSpanExporterFactory::Create();
  auto processor = trace_sdk::SimpleSpanProcessorFactory::Create(std::move(exporter));
  std::shared_ptr<opentelemetry::trace::TracerProvider> provider = trace_sdk::TracerProviderFactory::Create(std::move(processor));
  trace_api::Provider::SetTracerProvider(provider);
}

void InitMetrics()
{
    auto exporter = metrics_exporter::OStreamMetricExporterFactory::Create();
    auto u_provider = metrics_sdk::MeterProviderFactory::Create();
    std::shared_ptr<opentelemetry::metrics::MeterProvider> provider(std::move(u_provider));
    auto *p = static_cast<metrics_sdk::MeterProvider *>(u_provider.get());
    p->AddMetricReader(std::move(exporter));
    metrics_api::Provider::SetMeterProvider(provider);
}

void InitLogger()
{
  auto exporter = logs_exporter::OStreamLogRecordExporterFactory::Create();
  auto processor = logs_sdk::SimpleLogRecordProcessorFactory::Create(std::move(exporter));
  nostd::shared_ptr<logs_api::LoggerProvider> provider(
      logs_sdk::LoggerProviderFactory::Create(std::move(processor)));
  logs_api::Provider::SetLoggerProvider(provider);
}

Jaeger

Backend Setup

Jaeger natively supports OTLP to receive trace data. You can run Jaeger in a docker container with the UI accessible on port 16686 and OTLP enabled on ports 4317 and 4318:

docker run --rm \
  -e COLLECTOR_ZIPKIN_HOST_PORT=:9411 \
  -p 16686:16686 \
  -p 4317:4317 \
  -p 4318:4318 \
  -p 9411:9411 \
  jaegertracing/all-in-one:latest

Usage

Now following the instruction to setup the OTLP exporters.

Prometheus

To send your metric data to Prometheus, you can either enable Prometheus’ OTLP Receiver and use the OTLP exporter or you can use the Prometheus exporter, a MetricReader that starts an HTTP server that collects metrics and serialize to Prometheus text format on request.

Backend Setup

Note

If you have Prometheus or a Prometheus-compatible backend already set up, you can skip this section and setup the Prometheus or OTLP exporter dependencies for your application.

You can run Prometheus in a docker container, accessible on port 9090 by following these instructions:

Create a file called prometheus.yml with the following content:

scrape_configs:
  - job_name: dice-service
    scrape_interval: 5s
    static_configs:
      - targets: [host.docker.internal:9464]

Run Prometheus in a docker container with the UI accessible on port 9090:

docker run --rm -v ${PWD}/prometheus.yml:/prometheus/prometheus.yml -p 9090:9090 prom/prometheus --enable-feature=otlp-write-receive

Note

When using Prometheus’ OTLP Receiver, make sure that you set the OTLP endpoint for metrics in your application to http://localhost:9090/api/v1/otlp.

Not all docker environments support host.docker.internal. In some cases you may need to replace host.docker.internal with localhost or the IP address of your machine.

Dependencies

To send your trace data to Prometheus, make sure that you have set the right cmake build variables while building OpenTelemetry C++ from source:

cmake -DWITH_PROMETHEUS=ON ...

Update your OpenTelemetry configuration to use the Prometheus Exporter:

#include "opentelemetry/exporters/prometheus/exporter_factory.h"
#include "opentelemetry/exporters/prometheus/exporter_options.h"
#include "opentelemetry/metrics/provider.h"
#include "opentelemetry/sdk/metrics/meter_provider.h"
#include "opentelemetry/sdk/metrics/meter_provider_factory.h"

namespace metrics_sdk      = opentelemetry::sdk::metrics;
namespace metrics_api      = opentelemetry::metrics;
namespace metrics_exporter = opentelemetry::exporter::metrics;

void InitMetrics()
{
    metrics_exporter::PrometheusExporterOptions opts;
    opts.url = "localhost:9464";
    auto prometheus_exporter = metrics_exporter::PrometheusExporterFactory::Create(opts);
    auto u_provider = metrics_sdk::MeterProviderFactory::Create();
    auto *p = static_cast<metrics_sdk::MeterProvider *>(u_provider.get());
    p->AddMetricReader(std::move(prometheus_exporter));
    std::shared_ptr<metrics_api::MeterProvider> provider(std::move(u_provider));
    metrics_api::Provider::SetMeterProvider(provider);
}

With the above you can access your metrics at http://localhost:9464/metrics. Prometheus or an OpenTelemetry Collector with the Prometheus receiver can scrape the metrics from this endpoint.

Zipkin

Backend Setup

Note

If you have Zipkin or a Zipkin-compatible backend already set up, you can skip this section and setup the Zipkin exporter dependencies for your application.

You can run Zipkin on in a Docker container by executing the following command:

docker run --rm -d -p 9411:9411 --name zipkin openzipkin/zipkin

Dependencies

To send your trace data to Zipkin, make sure that you have set the right cmake build variables while building OpenTelemetry C++ from source:

cmake -DWITH_ZIPKIN=ON ...

Update your OpenTelemetry configuration to use the Zipkin Exporter and to send data to your Zipkin backend:

#include "opentelemetry/exporters/zipkin/zipkin_exporter_factory.h"
#include "opentelemetry/sdk/resource/resource.h"
#include "opentelemetry/sdk/trace/processor.h"
#include "opentelemetry/sdk/trace/simple_processor_factory.h"
#include "opentelemetry/sdk/trace/tracer_provider_factory.h"
#include "opentelemetry/trace/provider.h"

namespace trace     = opentelemetry::trace;
namespace trace_sdk = opentelemetry::sdk::trace;
namespace zipkin    = opentelemetry::exporter::zipkin;
namespace resource  = opentelemetry::sdk::resource;

void InitTracer()
{
  zipkin::ZipkinExporterOptions opts;
  resource::ResourceAttributes attributes = {{"service.name", "zipkin_demo_service"}};
  auto resource                           = resource::Resource::Create(attributes);
  auto exporter                           = zipkin::ZipkinExporterFactory::Create(opts);
  auto processor = trace_sdk::SimpleSpanProcessorFactory::Create(std::move(exporter));
  std::shared_ptr<opentelemetry::trace::TracerProvider> provider =
      trace_sdk::TracerProviderFactory::Create(std::move(processor), resource);
  // Set the global trace provider
  trace::Provider::SetTracerProvider(provider);
}

Custom exporters

Finally, you can also write your own exporter. For more information, see the SpanExporter Interface in the API documentation.

Batching span and log records

The OpenTelemetry SDK provides a set of default span and log record processors, that allow you to either emit spans one-by-on (“simple”) or batched. Using batching is recommended, but if you do not want to batch your spans or log records, you can use a simple processor instead as follows:

#include "opentelemetry/exporters/otlp/otlp_http_exporter_factory.h"
#include "opentelemetry/exporters/otlp/otlp_http_exporter_options.h"
#include "opentelemetry/sdk/trace/processor.h"
#include "opentelemetry/sdk/trace/batch_span_processor_factory.h"
#include "opentelemetry/sdk/trace/batch_span_processor_options.h"

opentelemetry::sdk::trace::BatchSpanProcessorOptions options{};

auto exporter  = opentelemetry::exporter::otlp::OtlpHttpExporterFactory::Create(opts);
auto processor = opentelemetry::sdk::trace::BatchSpanProcessorFactory::Create(std::move(exporter), options);

#include "opentelemetry/exporters/otlp/otlp_http_exporter_factory.h"
#include "opentelemetry/exporters/otlp/otlp_http_exporter_options.h"
#include "opentelemetry/sdk/trace/processor.h"
#include "opentelemetry/sdk/trace/simple_processor_factory.h"

auto exporter  = opentelemetry::exporter::otlp::OtlpHttpExporterFactory::Create(opts);
auto processor = opentelemetry::sdk::trace::SimpleSpanProcessorFactory::Create(std::move(exporter));

フィードバック

このページは役に立ちましたか?

Thank you. Your feedback is appreciated!

Please let us know how we can improve this page. Your feedback is appreciated!

最終更新 March 21, 2025: [i18n] Separate prose out of Convert docs/exporter/intro.md, and other improvements (#6583) (5db74ea6)